A SERVICE OF

logo

Open as PDF
next previous
Working with Larger Designs
6-38 Electronics Workbench
2. Add a 220 V, 50 Hz power supply to the circuit. (This is for the EU variant).
3. Add a 220V lamp to the circuit (also for the EU variant).
4. Assign variant status (in this case NA or EU) to each component as described below.
6.5.2.1 Assigning Variant Status to Components
This section continues the example of the variants for the North American (NA) and
European (EU) markets used in “6.5.1 Setting Up Variants” on page 6-34. After you have set
up these variants, you must set which component belongs to which variant.