Multicap Menus
Multicap 9 User Guide A-7
Edit/Title Block Position/Title Block Bottom Right
Places the title block at the bottom right of the sheet.
Edit/Title Block Position/Title Block Top Left
Places the title block at the top left of the sheet.
Edit/Title Block Position/Title Block Top Right
Places the title block at the top right of the sheet.
A.1.2.16Edit/Orientation
Shows options for changing the orientation of selected elements.
Edit/Orientation/Flip Horizontal
Flips the selection horizontally. For details, see “4.7 Rotating/Flipping Placed Components”
on page 4-30.
Edit/Orientation/Flip Vertical
Flips the selection vertically. For details, see “4.7 Rotating/Flipping Placed Components” on
page 4-30.
Edit/Orientation/90 Clockwise
Rotates the selection 90 degrees clockwise. For details, see “4.7 Rotating/Flipping Placed
Components” on page 4-30.
Edit/Orientation/90 CounterCW
Rotates the selection 90 degrees counter-clockwise. For details, see “4.7 Rotating/Flipping
Placed Components” on page 4-30.
A.1.2.17Edit/Symbol/Title Block
Use to do an in-place edit of a selected component’s symbol, or a selected title block.
A.1.2.18Edit/Font
Displays the Font dialog box, where you can change various font properties. Contains the
same information as the
Font tab in the Sheet Properties dialog box. For details, see “3.4.2.4
Sheet Properties - Font Tab” on page 3-28.
