A SERVICE OF

logo

Open as PDF
next previous
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
4-8 Advanced Configuration
v1.0, June 2007
To configure the WG602v4 in wireless repeater mode:
1. Open a web browser and log into the WG602v4 using the addressing scheme you have set up.
2. Under Advanced on the main menu, click Wireless Bridging. The Wireless Bridging screen
will display showing the default settings for the wireless access point.
3. Select the Repeater with Wireless Client Association radio button to enable Repeater Mode.
4. Enter the MAC address of the remote wireless access point and click Add. The AP’s MAC
address and connection information will appear in the Wireless Remote Access Point List.
5. Click Apply to save your changes.
Figure 4-5