NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
A-2 Default Configuration and Technical Specifications
v1.0, June 2007
Technical Specifications
The following table lists the specifications for the WG602v4.
Wireless
Wireless Communication Enabled
Wireless Network Name (SSID) NETGEAR
Security Disabled
Broadcast SSID Enabled
Transmission Speed Auto
a
Country/Region United States (in North America; otherwise, varies by
region)
RF Channel 11 until the region is selected
Operating Mode 802.11b/802.11g
Data Rate
Best
Output Power
Full
Access Point Mode Access Point
Wireless Card Access List All wireless stations allowed
MAC Address Filtering Disabled
WMM Support Disabled
Spanning Tree Protocol Enabled
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
Table A-2. Technical Specifications
Parameter NETGEAR WG602v4 54 Mbps Wireless Access Point
Radio Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps Auto Rate Sensing
Frequency 2.4-2.5Ghz
Data Encoding: Direct Sequence Spread Spectrum (DSSS) for 802.11b and Orthogonal
Frequency Division Multiplexing (OFDM) for 802.11g
Table A-1. Access Point Default Configuration Settings
Feature Description
