Putting the transmitter into operation
10
̈ Connect the antenna. You have the following options:
– You can connect the supplied rod antenna ƽ to the rear of the transmitter (see
page 8). In this case, insert the two blanking plugs into the holes of the blanking
plate (see diagram on page 9).
– You can use the AM 2 antenna front mount kit (see “Accessories and spare parts” on
page 36) and mount the rod antenna to the blanking plate .
– You can use a remote antenna, if necessary in conjunction with the AC 3 antenna
combiner.
̈ Slide the transmitter with the mounted blanking plate into the 19" rack.
̈ Secure the rack mount “ear” and the blanking plate to the 19" rack.
Rack mounting two transmitters
To mount two transmitters into a rack using the GA 3 rack adapter:
̈ Place the two transmitters side by side upside-down onto a flat surface.
̈ Secure the jointing plate to the transmitters using six recessed head screws (M 3x6).
̈ Secure the rack mount “ears” to the transmitters as described on page 8.
To mount the transmitters into the rack:
̈ Use remote antennas, if necessary in conjunction with the AC 3 antenna combiner.
For more information, visit the ew G3 product pages at www.sennheiser.com.
To mount the transmitters into the rack:
̈ Slide the transmitters into the 19" rack.
̈ Secure the rack mount “ears” to the 19" rack.
