Using the operating menu
20
Overview of the operating menu
When the standard display is shown on the display panel, you can get into the main menu by
pressing the jog dial. The extended menu “Advanced Menu” and the other menus can be
accessed via the corresponding menu items.
Display Function of the menu item Page
Main menu “Menu”
24
Sensitivity Adjusts the input sensitivity (0 to –42 dB in steps of 3 dB) 24
Mode Selects mono or stereo operation 25
Easy Setup Deactivates the RF signal and activates the Easy Setup Sync
function (see page 16)
Frequency Preset Sets the frequency bank and the channel 26
Name Enters a freely selectable name 26
Equalizer Changes the frequency response of the output signal using a
graphic equalizer (+/– 12 dB in steps of 2.4 dB)
27
AutoLock Activates/deactivates the automatic lock mode 28
Advanced Calls up the extended menu “Advanced Menu” 28
Exit Exits the operating menu and returns to the standard display
Extended menu “Advanced Menu”
Tune Sets the transmission frequencies for the frequency banks
“U1” to “U6”
28
Sets the frequency bank, the channel and the transmission
frequency (frequency banks “U1” to “U6”)
29
Sync Settings Adjusts the receiver parameters and activates/deactivates
their transfer to the receivers
30
Sensitivity
Mode
Easy Setup
Frequency Preset
Name
Equalizer
AutoLock
Advanced
Exit
Main menu
“Menu”
Tune
Sync Settings
RF Power
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Extended menu
“Advanced Menu”
“Warnings”
Balance
Squelch
Mode
High Boost
Auto Lock
Limiter
Exit
“Sync Settings”
AF Peak
RF Mute
Exit
