A SERVICE OF

logo

Putting the transmitter into operation
13
Connecting the mains unit
Only use the supplied mains unit. It is designed for the transmitter and ensures safe
operation.
̈ Insert the yellow connector of the NT 2-3 mains unit into the yellow socket ¾ of the
transmitter.
̈ Pass the cable of the mains unit through the cable grip º.
̈ Slide the supplied country adapter ƿ onto the mains unit ƾ.
̈ Plug the mains unit ƾ into a wall socket.
The STANDBY button is backlit in red.
ƿ
¾
º
ƾ
The AC 3 antenna combiner incorporates DC distribution to enable simultaneous
powering of up to four transmitters via its BNC sockets. These transmitters do not
require their individual power supply (see also page 12).