A SERVICE OF

logo

Open as PDF
next previous
14
2. Web Configuration Interface
The following table describes the columns found in the My Targets section Data Pane.
Server Name
The Server Name column displays all of the Target Servers and Serial devices that are accessible to the logged in
account. The Server Name for each port can be changed in the Configuration section of the Web Configuration
Interface (see the Switch Configuration section of this manual for details). Double-click on a Target Server to initiate a
remote session (See the Remote Session section of this manual for details on managing a remote session).
Server Status
The Server Status columnshowsthestatusoftheTargetServerconnectedtothecorrespondingport;Available, Off,
Blocked, Local Exclusive Session, Remote Exclusive Session, Remote Session, or No Communications with Device.
• Available – Indicates that a computer is connected to the corresponding port, and is available for use. This server
statusisindicatedbyaBlueportinthegraphicoftheKVM’sbackpanel.
• Off – Indicates that a computer/server is not connected to the corresponding port. This server status is indicated by
aBlackportinthegraphicoftheKVM’sbackpanel.
• Blocked – Indicates that the maximum number of simultaneous users have logged onto the KVM and are accessing
connected computers. In this situation, the status of all Target Servers is Blocked, except those that are being
accessed by other accounts. For those ports that are being accessed by other accounts, the status will appear as
either Remote Session or Remote Exclusive Session. (see the Sharing a Remote Session and Exclusive Session
sections in this manual for details) Target Servers that are Blocked cannot be accessed. A Blocked server status is
indicatedbyaReddishBrownportinthegraphicoftheKVM’sbackpanel.
• Local Exclusive Session – Indicates that the corresponding port is currently being accessed by a local account.
ThisserverstatusisindicatedbyaGreenportinthegraphicoftheKVM’sbackpanel.
• Remote Exclusive Session – Indicates that an account is currently accessing the corresponding port in exclusive
mode, preventing anyone else from connecting to it. This server status is indicated by an Orange port in the graphic
oftheKVM’sbackpanel.
• Remote Session – Indicates that an account is currently accessing the corresponding port in share mode, which allows
up to 5 users to access a port at the same time. (see the Sharing a Remote Session and Exclusive Session sections in
thismanualfordetails)ThisserverstatusisindicatedbyaGreenportinthegraphicoftheKVM’sbackpanel.
• No Communications with Device – Indicates that a computer/server is connected to the corresponding port, but is
not communicating with the KVM, and is therefore inaccessible. This server status is indicated by a Red port in the
graphicoftheKVM’sbackpanel.
User
The User column displays the account that is currently accessing the corresponding port.
The following table describes the functionality of the Web configuration toolbar buttons.
Icon Description
Click the Save icon after making any changes in the Configuration section. This saves your changes.
In the Configuration section, clicking the Reload icon will return a page to the most recently saved settings. For example,
ifyouenterincorrectinformationintoaeldandwanttogobacktothepreviousvalue,butcan’trememberwhatthe
previous value of the field was, clicking the Reload icon will bring it back.
Click the Device Reboot icon to reboot the KVM.
Click the Device Upgrade to perform a firmware upgrade on the KVM (See the Firmware Upgrade section in this manual
for details).
Click the RoCs Upgrade icon to perform a firmware upgrade on the SIUs in the installation (See the Firmware Upgrade
section in this manual for details).
Clicking on the Factory RestoreiconwillrestoretheKVM’sdefaultsettings,resettingallinformationthathadbeen
changed.Theaffectedsettingsincludenetworkinformation,servers,switches,users,andpasswords.Youwillbegiven
the option of preserving the network settings when performing a Factory Restore.
Clicking on the Backup/Restore iconallowsanadministratortobackuporrestoretheKVM’ssettings(SeetheBackup/
Restore section in this manual for details).
Clicking on the SSL Certificate icon allows an administrator to install an SSL certificate (See the SSL Certificate section in
this manual for details).
2.4 Configuration Section
The Configuration section of the Web Configuration Interface is
whereadministratoraccountscanconguretheKVM’ssettingsand
account access. When accessing the Configuration section, there
are a number of sub-sections displayed as notebook tabs. Clicking
on a tab will display the settings for that sub-section. The features of
the Configuration section are described in the following pages.