Filter
Top Products
Management and Diagnostic Console
124
The following table shows the possible nodes that can display on the Link Manager States page.
The nodes that display are dependent on the 2Wire gateway. For example, 2Wire gateways that are not
connected to the Internet via ADSL will not display ADSL information.
Node Description
root0 Root for configuration tree.
global0 Branch for all global configuration modules.
device0 Maintains the status and configuration for devices on the 2Wire gateway.
rnat0 Maintains the application mappings and pinholes for nodes on the 2Wire gateway.
route0 Maintains all static routes on the 2Wire gateway.
fw0 Maintains all firewall rules on the 2Wire gateway.
cms0 Monitors CMS connectivity and activity with the 2Wire gateway.
home0 Branch for the home network modules.
vlan0 Home network virtual LAN configuration module.
ipnet1 Home network IP configuration module.
vlanmon0 Home network virtual LAN monitor for activity.
ipbridge0 Home network IP bridge/DMZ configuration module.
ipnet2 Home network public IP network configuration module.
vlan3 Home network voice virtual LAN module.
bband0 Branch for the primary broadband network.
vlan1 Primary broadband virtual LAN configuration module.
dhcp0 Primary broadband DHCP client module.
ipnet0 Primary broadband IP configuration module.
dnstest0 Primary broadband DNS access test module.
vlan2 Primary broadband PPP bridge virtual LAN.
dsl0 DSL device control module.
apvc0 Primary broadband ATM and auto PVC search module.
pppoe0 Primary broadband PPPoE configuration module.
pppoa0 Primary broadband PPPoA configuration module.
rtatm0 Primary broadband routed ATM configuration module.