2Wire None Network Router User Manual


 
Management and Diagnostic Console
87
Allowing all applications
DMZplus is used for hosting applications if an application will not operate properly using the “Allow
individual application(s)” option. When in DMZplus mode, the designated computer:
Shares the gateway’s IP address.
Appears as if it is directly connected to the Internet.
Has all of the unassigned TCP and UDP ports opened and pointed to it.
Can receive unsolicited network traffic from the Internet.
To configure a computer on the user’s network for DMZplus mode:
1. Select the computer to which the user wishes to have all data sent.
2. Click the Allow all applications (DMZplus mode) radio button.
3. Click Submit.
4. Access the selected computer.
5. Confirm that the computer is configured for DHCP. If it is not, configure it for DHCP.
6. Restart the computer.
When the computer restarts, it receives a special IP address from the system and all unassigned TCP and
UDP ports are forwarded to it.