Filter
Top Products
Quick Installation Guide 5
CAUTION: To prevent damage to components when you handle them,
always wear an electrostatic discharge (ESD) wrist strap. Verify that the
strap makes good skin contact and that you are properly grounded.
For installation instructions, see the
System Processor Memory Upgrade
Installation Guide
.
You are now ready to install the media modules. For instructions, see the
Module Installation Guide
that is shipped with each module or the
chapter on “Installing Modules” in the
Getting Started Guide
.
CAUTION: Electrostatic discharge (ESD) can damage components on a
module, causing complete or intermittent failures. ESD damage occurs
when the module is improperly handled. Before you handle a module, be
sure to read and follow the ESD safety information that is provided in the
Module Installation Guide
.
Cable your system to connect the system processor ports and media
modules to your network.
For information on cabling system processor ports and media modules,
see the chapter on cabling in the
Getting Started Guide
or the installation
guide for each module.
Table 3
System Memory Configuration at Release 1.2 or Earlier
Memory Location
Factory-
Installed
Memory (MB)
Available
Expanded
Memory (MB)
Part Number
Total
Memory
(MB)
Application Processor 16 (on board) 16 SIMM 10001299 32
Frame Processor 4 (on board) 16 SIMM 10001299 20
Flash 8 (on board) 8 SIMM 531-00007-000 16
Install Media
Modules
6
Cable Processor
and Media Modules
7