Filter
Top Products
Setup Program 13
To setup the gateway for use with a PPP over Ethernet connection, use the
following procedure:
1 Enter your PPP over Ethernet user name in the PPPoE User Name text box.
2 Enter your PPP over Ethernet password in the PPPoE Password text box.
If you don’t want to change the password, leave this text box empty.
3 Enter your PPP over Ethernet service name in the PPoE Service Name text box.
This is optional. Not all ISPs require a PPPoE service name.
4 Enter a value in the Maximum Idle Time text box.
This value will correspond to the amount of idle time (no Internet activity), in
seconds, that will pass before the gateway automatically ends your PPP over
Ethernet session. Leave the text box blank to disable this function.
5 Check all of your settings, and then click Reboot.
The gateway will restart, and your settings will be activated.
Dial-up Network
Activating the Dial-up Network radio button and then clicking SAVE & NEXT in the
Choose Internet Connection Configuration screen will generate the Primary Setup
screen for dial-up networking setup.
To setup the gateway for use with a dial-up connection, use the following
procedure:
1 Enter your dial-up telephone number in the Dial-up Telephone Number text box.
2 Enter your dial-up user name in the Dial-up User Name text box.
3 Enter your dial-up password in the Dial-up Password text box.
4 Enter your primary DNS address in the Primary DNS Address text box.
5 Enter your secondary DNS address in the Secondary DNS Address text box.
This is optional. Not all ISPs require a secondary DNS address.
6 Enter a value in the Maximum Idle Time text box.
This value will correspond to the amount of idle time (no Internet activity), in
seconds, that will pass before the gateway automatically ends your dial-up
session. Leaving the text box blank disables this function.