Filter
Top Products
Configuring on UNIX-based Platforms 21
Windows NT
1 From the Start menu, select Settings, and then Printers.
2 Locate the icon that corresponds to the printer connected to the gateway.
Right-click the icon, and then select Properties.
3 Select Ports, and then select PRTmate: (All-in-1) from the Print To the following
port: list.
Be sure that the printer driver is the correct driver for your the printer.
4 Click Configure Port. Enter the IP address of the gateway and then click OK.
5 Make sure that all settings mentioned above are correct and then click OK.
Configuring on
UNIX-based Platforms
Follow the traditional configuration procedure on UNIX platforms to setup the
print server of this product. The printer name is “lp.”