Accessing the Wizard 37
PPPoE Mode
Figure 17 PPPoE Screen
To setup the Router for use with a PPP over Ethernet (PPPoE) connection,
use the following procedure:
1 Enter your PPP user name in the PPPoE User Name text box.
2 Enter your PPP password in the PPPoE Password text box.
3 Enter your PPP over Ethernet service name in the PPPoE Service Name text
box.
Do not enter anything in this box if your ISP does not require a service
name.
4 Select Dial on Demand if you want the the internet connection dropped
when there is no activities with the Internet. Enter an idle time from the
Maximum Idle Time drop down list. This is the amount of time without
Internet activity that you want to allow before the Router ends the PPPoE
session.
5 Manual IP Address/DNS Server configuration: Enter the IP Address that
you would like to be assigned to the router’s WAN interface if you have
required one from your ISP. And enter the DNS Server’s IP Address if it is
given by your ISP(optional).
6 Check all of your settings, and then click Next.