Filter
Top Products
Accessing the Wizard 39
Dynamic/Fixed IP in 1483 Bridge Mode
Figure 19 The Dynamic/Fixed IP in Bridge Mode
To setup the Router for use with a Dynamic/Fixed IP in 1483 Bridge
Mode connection, use the following procedure:
1 Manual IP Address Configuration: You may enter the router’s WAN IP
address and subnet mask here if your ISP has given you a static IP
Address.
2 Manual Default Gateway Configuration: Enter the gateway’s IP address or
select the WAN interface to use to connect to it.
3 Manual DNS Server Configuration:
Your ISP may provide you with primary and secondary DNS addresses. If
they have been provided, enter the addresses in the appropriate text
boxes. If not, leave 0.0.0.0 in the boxes.
4 Check all of your settings, and then click Next.