Internet Settings 65
Figure 40 WDS Screen
To setup a WDS, make sure that the following conditions are met for all
of the linked APs:
1 Both AP's WDS should be enabled.
2 APs are configured with the same Channel, SSID and Encryptions.
3 Each AP should have a different IP Address.
Internet Settings Before you can configure the Router, you need to know the IP
information allocation method used by your ISP. There are five different
ways that ISPs can allocate IP information, as described below:
1 PPPoA (PPP over ATM)
The ISP provides the IP addressing information for you to enter manually.
To configure the Router you will need to know the following:
■ User name
■ Password
■ Authentication Method