Filter
Top Products
1 - 4 ONline Ethernet 10BASE-T Module User’s Guide
Dip Switches
The 10BASE-T Module has three dip switches located on the module:
❑ 8-switch dip switch (SW1)
❑ 4-switch dip switch (SW3)
❑ 8-switch dip switch (SW6)
Table 1-1. Interpretation of the 10BASE-T Module LEDs
LED Name Color State Indicates
Activity
(Ports 1-8)
yellow Off No packets are received on
the segment.
On Constant activity on the
segment.
Blinking Normal activity on the
segment.
Status
(Ports 1-8)
green Off Port disabled.
On Port enabled and Link
Integrity is functional.
1 blink Link Integrity error.
2 blinks Jabber error or port
partitioning.
Timed blinks (LED
is on for 10
seconds, blinks
off for 400 msecs)
Link Integrity disabled for
this active port.