Filter
Top Products
3 - 4 ONline Ethernet 10BASE-T Module User’s Guide
4. Fasten the spring-loaded screws on the front of the 10BASE-T Module
face-plate to the concentrator with your fingers (do not overtighten).
5. Attach the twisted pair cable to the port on the front of the 10BASE-T
Module as shown in Figure 3-2. Then attach the other end of the
cable to another 10BASE-T Module, a 10BASE-T Transceiver, or a
10BASE-T Adapter Card.
Figure 3-2 shows a cable attached to the 10BASE-T Module.
Figure 3-2. 10BASE-T Module Cable Connection