Filter
Top Products
4 - 4 ONline Ethernet 10BASE-T Module User’s Guide
2 Blinks Port
Partitioning
Faulty cable Check cable with cable
tester. Repair or replace
cable.
Network
overloaded
Reassign users to
another channel to
balance the load.
Jabber
condition
Transceiver
attached to the
port is jabbering
or has DTE
jabber
Try another port or
replace module.
Timed
Blinks (LED
is on for 10
seconds,
blinks off
for 400
msecs)
Link
Integrity
Disabled
None This is not a problem.
You may want Link
Integrity disabled.
Table 4-1. Troubleshooting With the Port Status LEDs (Continued)
LED State Indication
Possible
Problem
Troubleshooting
Suggestions