Filter
Top Products
7-12 CHAPTER 7: ADMINISTERING IP ROUTING
Defining a Port and
IP Forwarding
Address
You can define port numbers and IP forwarding addresses for the UDP
Helper. You can have up to 32 combinations of port numbers/IP forwarding
addresses per router. You can also have multiple IP address entries for the
same ports.
To define port numbers and IP forwarding addresses:
1 From the top level of the Administration Console, enter:
ip udpHelper define
2 Enter the slot of the switching module for which you want to define port
numbers and IP forwarding addresses.
3 Enter the port numbers and IP forwarding addresses you want to define.
Removing a Port
and IP Forwarding
Address
To remove a port number or IP forwarding address defined for UDP Helper:
1 From the top level of the Administration Console, enter:
ip udpHelper remove
2 Enter the slot of the switching module for which you want to remove an
port number/IP forwarding address.
3 Enter the UDP port number that you want to remove.
4 Enter the IP forwarding address that you want to remove.
The port numbers/IP forwarding addresses are immediately removed.
Top-Level Menu
system
ethernet
fddi
tokenring
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
➧udpHelper
forwarding
rip
ping
statistics
display
➧define
remove
hopCountLimit
threshold
Top-Level Menu
system
ethernet
fddi
tokenring
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
➧udpHelper
forwarding
rip
ping
statistics
display
define
➧remove
hopCountLimit
threshold