Filter
Top Products
V6000 Analog Integrated Branch Office Solution Installation Guide V6000 Analog Integrated Branch Office Sol
26
Figure 7 MP-104 Endpoint Phone Number Table
3 Connect the RJ-11 cable of telephone A to port 1 of module 1 (where module 1 is an
FXS module) on the V6000. Connect the RJ-11 cable of telephone B to port 1 on the
MP-104 gateway.
4 Offhook the receiver of telephone A (whose number you defined as 101) and dial 301;
telephone B connected to the MP-104 rings.
5 Offhook telephone B and test the line for voice.
To make a call from telephone B on the MP-104 to telephone A on the V6000, you
must define the internal routing table on the MP-104.