9/92
4-5
MODEL 2100 OVERHEAD PROJECTOR
COLOR TUNING CABLE
(Before Serial Number 422868)
NOTE
Tension in cable should be 3/16"
maximum.
A. Raise the Top Cover Assembly by pulling
the Release Latch and lift up. (See
Figure)
B. Turn the Color Tuning Knob clockwise to
the maximum.
C. While holding the Cable Screw, loosen
the Cable Nut. Using pliers, pull the slack
out of the cable.
D. Retighten Cable Nut and Screw. (See
Figure)
COLOR TUNING CABLE
(After Serial Number 422868)
No adjustment.