13
3M
™
Pocket Projector MP180
© 2011 3M. All Rights Reserved.
English
Charge the Battery
The 3M MP180 rechargeable battery gives you up to two hours of battery life.
When the battery needs to be charged, the status indicator LED flashes red. The
battery should be fully charged before using the 3M MP180projector.
Charge the battery by connecting the 3M MP180 power adapter to theprojector.
When the power adapter is connected, the LED flashes green three times and then
stays solid green. When looking at the home screen, the battery status icon is
animated while charging and full when charging is complete.
1 Turn the projector power off.
2 Connect the power adapter to the projector’s DC input.
3 Connect the other end of the power adapter into the electrical outlet.
4 The status indicator will change to amber while the battery is charging.
5 Allow three hours to fully charge the battery. When charging is complete, the
status indicator will turn off.
110–240 VAC
50/60 Hz