3M MP180 Projector User Manual


 
21
3M
Pocket Projector MP180
© 2011 3M. All Rights Reserved.
English
Using the microSD Card Slot
The 3M MP180 projector has a microSD card slot that can read up to a 32 GB card.
You can either place files on the card before you insert it into the projector’s card
slot or while the projector is connected to a USB port on a computer.
Inserting the microSD Card
1 Open the microSD slot door.
2 Insert the microSD card into the microSD slot until it “clicks” into place.
3 Close the microSD door.
Ejecting the microSD Card
1 Open the microSD slot door.
2 Push the microSD card into the microSD slot until it “clicks”.
3 Release the microSD card and the card will eject.
Note: The projector cannot transfer files from the microSD card to the
projector’s internalmemory.
Transfer Files to the Projector
The MP180 has both built-in memory and a removable microSD card where
you can place files. You can put files on the 3M MP180 projector using a USB
connection or Bluetooth wireless connection, or you can transfer files to a microSD
card prior to inserting it into the MP180. The following sections cover transferring
files using a USB connection and Bluetooth wireless connection.