Filter
Top Products
you spot a spliced roll in advance, you can put it on the top supply roll mandrel in order
to see the splice coming more easily avoid putting material under the splice. Or you
could put it on the bottom roll if you plan to be laminating items that will never be seen
from the back side.
1-7 Warranty
This laminator is guaranteed against defects in material and workmanship for a period of
two years after date of shipment. Defective parts will be replaced without cost within the
warranty period, provided the laminator has not been abused, altered or operated contrary
to instructions. Ledco, Inc. Shall not be liable for any alterations or repairs except those
made with its written consent.
This obligation under warranty shall not extend to the following:
• The adjustment or replacement of parts which are the normal responsibility of the
owner. For example, rubber rollers, heat shoe coatings, scratched or chipped paint,
loose fasteners (screws, nuts, etc.), or other items that show wear under normal use;
i.e. “normal wear parts”.
• Normal operating adjustments to heat, speed, tension, etc.
• Parts that are not manufactured by Ledco, Inc. If the individual manufacture warrants
these items, their warranty is, in turn, passed on to the original purchaser of the
laminator. Ledco, Inc. does not incur any obligation or liability as a result of the
warranties that are the sole responsibility of the appropriate individual manufacturer.
Any laminator that provides defective during the warranty period may be returned to
Ledco, Inc. unless it is decided that the necessary repairs can be made during a service
call. Notice of the defect should be submitted in writing or by phone to Ledco before any
steps are taken to repair or return the machine. Phone: 716-367-2392 Fax: 716-367-2978
If the machine is returned, the following should accompany it.
• Customer name, address and phone number.
• Written particulars regarding the malfunction.
• Date of installation.
• Serial number of machine.
• All returns must have a return authorization number on the outside
of the shipping container. Send all returned equipment freight
PREPAID to: Ledco, Inc., 4265 North Main Street, Hemlock, NY 14466:
Tel: 716-367-2392 Fax: 716-367-2978 Email: ledco@ledcoin.com
If your machine needs servicing after the warranty has expired, please contact your
dealer. Ledco, Inc. does offer technical support if your dealer is unable to assist.
This warranty is expressly in lieu of all other warranties expressed or implied, including
the warranties of Merchantability and Fitness For Use and of all other obligation or