Filter
Top Products
Chapter 2
AT7/AT7E
2-12
(6). IEEE1 Header: IEEE 1394 Header (For AT7 Full Version Only)
This header is reserved for connection to the ABIT
Media XP product (Optional). The Media XP can
provide the total solution for the front panel
connections. It provided a various function, like a:
SD/MS/CF card reader, USB 2.0/IEEE 1394
connectors, S/PDIF-Out connector and
MIC/Earphone connectors. They all designed on one
5.25” diskette size panel, can fit on the chasses front
panel 5.25” diskette slot.
For detailed information of ABIT Media XP, please
see its user’s manual.
Note: Watch the pin position and the orientation
Note
You don’t need to install any additional drivers for IEEE 1394 devices. The newest operation system
will fully support this feature. For example: Windows
®
2000, Windows
®
XP, etc.
(7). CCMOS1 Header: CMOS Discharge Jumper
Jumper CCMOS1 used to discharge CMOS memory.
When you install the motherboard, make sure this
jumper is set for normal operation (pin 1 and 2
shorted). See figure below.
Note: Watch the pin position and the orientation