Filter
Top Products
Chapter 1
AT7/AT7E
1-4
# Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be
able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
# HPT 374 IDE controller is designed to support high-speed and high performance mass storage
devices. Thus we suggest that you don’t connect non-disk devices that use ATA/ATAPI
interfaces, such as CD-ROM to HPT 374 IDE connector (IDE3, IDE4, IDE5 and IDE6). (For
AT7 full version only)
# This motherboard supports the standard bus speeds of 66 MHz/100 MHz/133 MHz that are
used by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds
is not guaranteed due to the specific component specifications.
# Specifications and information contained in this manual are subject to change without notice.
Note
All brand names and trademarks are the property of their respective owners.
1-3. Item Checklist
Check that your package is complete. If you discover any damaged or missing items, please contact your
retailer or dealer.
$ One ABIT AT7 or AT7E motherboard
$ Three 80-wire/40-pin ribbon cable for master and slave Ultra DMA 133, Ultra DMA 100, Ultra DMA
66 or Ultra DMA 33 IDE devices
$ One ribbon cable for 3.5” floppy disk devices
$ One compact disc for support drivers and utilities
$ One USB cable (For USB 1.1 used)
$ One DIY bag
$ One user’s manual for the motherboard
$ One floppy disk of HPT 374 drivers (AT7 Full Version Only)
$ One I/O shield