Filter
Top Products
HPT 374 RAID Management Software Installation Guide for Windows
®
2000 6-1
User’s Manual
Chapter 6. HPT 374 RAID Management Software
Installation Guide for Windows
®
2000
In order to enable the on-screen monitoring function displaying disk array device information, you may
install the “HPT 374 RAID Management” onto your system. The main features of this administrator are
described below:
1. It can let you monitor the status of HDDs that are connected on HPT 374 controller. It can show the
RAID types and status on screen.
2. It can directly create any mode of the RAID function in a Windows environment, making it easier and
more user friendly than creating the RAID function in BIOS mode.
Please insert the AT7 series CD into your CD-ROM drive. It should execute the program automatically. If
not, you can go to the CD location and execute the execution file from the main directory of the CD.
After it is executed, you will see the screen shot below.
Step 1: Move the cursor to “HPT374 RAID
Management” and click on it to go to the next
step.
Step 2: The “InstallShield Wizard” shows up,
and it will go to the next screen for a while.
Step 3: You will now see the welcome screen
and its dialogue box. Click “Next>” to go on.
Step 4: The software license agreement screen
shows up, read it and then click “Yes” to go on.