Filter
Top Products
SuperSmart User’s Guide
4-4 Setup and Configuration
To summarize,
1. Access configuration functions by using a "long press".
LEDs light up to indicate the current configuration function.
(Example: One of the Segment LEDs will BLINK to indicate
that the system is in Segment Setting mode.)
2. Compare the LED display you see on the hub’s front panel
with the appropriate LED display in the succeeding pages.
Each LED display corresponds to a selection within a
function. (Example: If the system is in Segment Setting
function, see the LED display table under
Segment Setting in
this chapter).
3. If you want to implement the selection displayed for your hub,
proceed to step 4. Otherwise, move to the next selection
using a "short press". Repeat a "short press" until you find
the selection you want.
4. To implement your selection and continue on to the next
function, use a "long press".