Accton Technology VS4512 Switch User Manual


 
Glossary-1
Glossary
Boot Protocol (BOOTP)
BOOTP is used to provide bootup information for network devices, including IP
address information, the address of the TFTP server that contains the devices
system files, and the name of the boot file.
Class of Service (CoS)
CoS is supported by prioritizing packets based on the required level of service, and
then placing them in the appropriate output queue. Data is transmitted from the
queues using weighted round-robin service to enforce priority service and prevent
blockage of lower-level queues. Priority may be set according to the port default, the
packet’s priority bit (in the VLAN tag), TCP/UDP port number, IP Precedence bit, or
DSCP priority bit.
Customer Premises Equipment (CPE)
Terminating equipment, such as terminals, phones, and routers, supplied by the
phone company, installed at customer sites, and connected to the phone company
network.
Differentiated Services Code Point Service (DSCP)
DSCP uses a six-bit tag to provide for up to 64 different forwarding behaviors. Based
on network policies, different kinds of traffic can be marked for different kinds of
forwarding. The DSCP bits are mapped to the Class of Service categories, and then
into the output queues.
Domain Name Service (DNS)
A system used for translating host names for network nodes into IP addresses.
Dynamic Host Control Protocol (DHCP)
Provides a framework for passing configuration information to hosts on a TCP/IP
network. DHCP is based on the Bootstrap Protocol (BOOTP), adding the capability
of automatic allocation of reusable network addresses and additional configuration
options.
Extensible Authentication Protocol over LAN (EAPOL)
EAPOL is a client authentication protocol used by this switch to verify the network
access rights for any device that is plugged into the switch. A user name and
password is requested by the switch, and then passed to an authentication server
(e.g., RADIUS) for verification. EAPOL is implemented as part of the IEEE 802.1x
Port Authentication standard.