Filter
Top Products
Machine Maintenance Procedures 3-19
3G Module Removal 0
Prerequisite:
Lower Cover Door Removal
1. Locate module (C) on lower cover. (Figure 3-9)
2. Disconnect main (E) and auxiliary (F) antenna cables from module. (Figure 3-15)
Figure 3-15. 3G Module with Antenna Cables
NOTE:
NOTE:
Main (yellow) antenna connector is close to HDD module. Auxiliary (blue) antenna
connector is close to front edge of computer.
3. Remove screw (D) from mainboard.
4. Remove module from mainboard connector (G).
3G Module Installation 0
1. Insert module into mainboard connector (D). (Figure 3-15)
2. Install and secure screw (D) to mainboard.
3. Connect main (E) and auxiliary (F) antenna cables on 3G module.
4. Install and secure screw (D) to mainboard.
5. Install lower cover door.
ID Size Quantity Image
D M2x3 t=0.04 1
D
G
E
F