Filter
Top Products
Machine Maintenance Procedures 3-43
LCD Panel Removal 0
Prerequisite:
CCD (Charge-Coupled Device) Module Removal
1. Locate LCD panel (B) on module cover. (Figure 3-43)
2. Remove four (4) screws (C) from module cover.
3. Lift adhesive foil tabs (E) covering LVDS cable.
4. Remove panel from module cover.
5. Turn panel over and place face down on a clean surface (Figure 3-45).
Figure 3-45. LCD Panel with LVDS Cable
6. Remove CCD module cable (F) from panel.
7. Pull back transparent adhesive protector (J) securing LVDS cable (G) to panel.
8. Disconnect LVDS cable (G) from panel connector (H).
9. Remove LVDS cable (G) from panel.
F
J
G
H