Filter
Top Products
3-14 Machine Maintenance Procedures
HDD (Hard Disk Drive) Module Removal 0
Prerequisite:
Lower Cover Door Removal
1. Locate HDD module (A) on lower cover. (Figure 3-9)
Figure 3-9. Lower Cover Overview with Base Door Removed
2. Remove three (3) screws (B) from lower cover. (Figure 3-10)
Figure 3-10. HDD Module in Lower Cover
3. Using mylar tab (F), disconnect module from mainboard connector (G).
4. Lift module out of module bay.
5. Remove four (4) screws (H) from module. (Figure 3-11)
A
B
C
D
E
F
E
E
G