Filter
Top Products
61
Error messages
If you receive an error message, note the message and take the
corrective action. The following table lists the error messages in
alphabetical order together with the recommended course of action.
Error Messages Corrective Action
CMOS Battery Bad Contact your dealer or an authorized
service center.
CMOS Checksum Error Contact your dealer or an authorized
service center.
Disk Boot Failure Insert a system (bootable) diskette into
the floppy drive (A:), then press
Enter
to reboot.
Diskette Drive Controller Error or
No Controller Present
Contact your dealer or an authorized
service center.
Diskette Drive Error Contact your dealer or an authorized
service center.
Diskette Drive Type Mismatch Press
F2
(during POST) to enter the BIOS
Utility; then press
Esc
to exit and
reconfigure the computer.
Equipment Configuration Error Press
F2
(during POST) to enter the BIOS
Utility; then press
Esc
to exit and
reconfigure the computer.
Hard Disk 0 Error Contact your dealer or an authorized
service center.
Hard Disk 0 Extended Type Error Contact your dealer or an authorized
service center.
I/O Parity Error Contact your dealer or an authorized
service center.
Insert system diskette and press
<Enter> key to reboot
Insert a system (bootable) diskette into
the floppy drive (A:), then press
Enter
to reboot.