Filter
Top Products
Chapter 2 49
Main
The Main screen displays a summary of your computer hardware information, and also includes basic setup
parameters. It allows the user to specify standard IBM PC AT system parameters.
Note: The screen below is for reference only. Actual values may differ.
IDE1 Model Name This field displays the model name of devices installed on secondary IDE
master. The hard disk drive or optical drive model name is automatically
detected by the system
IDE1 Serial Number This field shows the serial number of devices installed on secondary IDE master
ATAPI Model Name This field displays the ATAPI model name
System BIOS ver Displays system BIOS version
VGA BIOS Ver This field displays the VGA firmware version of the system
Serial Number This field displays the serial number of this unit
Asset Tag Number This field displays the asset tag number of the system
Product Name This field shows product name of the system
Manufacturer Name This field displays the manufacturer of this system
UUID Number This will be visible only when an internal LAN device is present
Parameter Description
KLIJ
:Move Enter: Select +/-/PU/PD :Value F10: Save and Exit ESC:Exit
F1: General Help F5: Previous Values F7: Optimized Defaults
Network Boot [Enabled]
F12 Boot Menu [Disabled]
D2D Recovery [Enabled]
Quiet Boot [Enabled]
Extended Memory XXX
Video Memory [8M]
Menu Level
X
System Memory 640KB
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Main
System Time [09 : 00: 00]
Help Item
System Date [01 : 01: 2007]