Filter
Top Products
Chapter 3 67
Removing the Wireless Card
Note: Fine tweezers are required for this procedure.
1. Locate the three antenna wires (colored white,
gray, and black) on the right-hand side of the
HDD bay.
2. Using fine tweezers, grip the white wire and pull
upward until it is released from the board.
Repeat for the gray and black wires.
3. Locate the two screws securing the Wireless
Card.
4. Locate and remove the two screws securing the
Wireless Card.
Note: The Wireless Card lifts up automatically
once the screws are removed.
5. Grip card and pull away from socket as shown.