Filter
Top Products
78 Chapter 3
LCM Module Disassembly Procedure
Removing the LCM Bezel
CAUTION: When using tools, be careful not to scratch the computer casing.
1. Locate and remove the four mylar (small red markers) and two rubber (large red markers) screw covers
as shown. Remove the six bezel securing screws.
Note: Do not discard the screw covers — they are reusable.
2. Loosen the bezel by lifting all the edges upward as shown.
3. Push in the cover locks to allow the bezel to pass
freely over them.
4. Remove the bezel from the LCM Module.