Filter
Top Products
47
Upgrading the CPU
This section includes instructions for removing and installing a CPU.
To remove a CPU with heatsink
Before you can install a new CPU in a socket, remove first any
previously installed CPU from that socket.
Important: Before removing a CPU from the mainboard, make
sure to create a backup file of all important data.
1 Observe the ESD precautions and pre-installation procedures
described on page 31.
2 Locate the CPU socket on the mainboard.
3 To detach the CPU from its socket, follow the steps below:
(1) Depress then lift up the retainer lever up to a 90° angle.
(2) Pull out the CPU from the socket.
Warning! The heatsink becomes very hot when the system
is on. NEVER touch the heatsink with any metal or with
your hands.
AA G700 - EN.book Page 47 Friday, June 7, 2002 9:27 AM