Filter
Top Products
Chapter 2 42
PnP/PCI Configurations
It configures how PnP (Plug and Play) and PCI expansion cards operate in your system. Both the
ISA and PCI buses on the main board use system IRQs (interrupt requests) and DMAs (direct
memory access). You must set up the IRQ and DMA assignments correctly through the PnP/PCI
Configurations Setup Utility for the main board to work properly. Selecting PnP/PCI
Configurations on the main program screen displays the menu below.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some non-standard VGA cards.
This board includes a built-in VGA system that does not require palette snooping so you must
leave this item disabled.
Maximum Payload Size
This item specifies the maximum TLP payload size for the PCE Express devices.