Filter
Top Products
3 System upgrade
42
To remove a memory module:
1 Perform the pre-installation instructions described on page 26.
2 Lay the server on its side (components showing).
3 If necessary, remove any cables that prevent access to the DIMM
slots.
4 Locate the memory module you intend to remove.
5 Remove the memory module.
(1) Press the retaining clips on both sides of the slot outward to
release the DIMM.
(2) Hold the DIMM by its edges, then gently pull it upward to
remove it.
6 Store the removed memory module inside an anti-static bag.
7 If you intend to install a new memory module, proceed to the next
section for related procedure, otherwise observe the
post-installation instructions described on page 26.
Dual
channel
512 MB 512 MB 1 GB
1 GB 1 GB 2 GB
2 GB 2 GB 4 GB
512 MB 512 MB 512 MB 512 MB 2 GB
1 GB 1 GB 1 GB 1 GB 4 GB
2 GB 2 GB 2 GB 2 GB 8 GB
Interleave
mode
Channel A Channel B
Total
memory
DIMM1A DIMM2A DIMM1B DIMM2B