Filter
Top Products
105
SATA RAID configuration utilities
Altos G330 supports onboard SATA RAID from both Intel and LSI SATA
RAID functions. You need to enable either function in the BIOS Setup
Utility before you can configure a SATA RAID volume.
Caution: Creating a RAID volume erases all data previously saved
in the hard drives. Make sure that you back up important files
before starting a RAID configuration process.
Note: For OS installation procedures, refer to the user
documentation that came with your OS pack.
Onboard Intel SATA RAID configuration
This section briefly shows how to create a RAID 1 (mirror) volume using
the onboard Intel SATA RAID function.
Enabling the onboard Intel SATA RAID function
1 Turn on the server and the monitor.
2 During POST, press F2 to access the BIOS Setup Utility.
3 Select the Advanced
| IDE Controller submenu.
4 Change the setting of the Configure SATA as RAID
field to
Enabled.
The SATA RAID OPROM
field will appear.
5 Change the setting of the SATA RAID OPROM
field to Intel Matrix
Storage.
6Press F10, and select Yes to save the new SATA RAID settings and
close the Setup Utility.