Filter
Top Products
Appendix B: SATA RAID configuration
106
Entering the onboard Intel SATA RAID Configuration Utility
Note: There must be more than two SATA hard drives installed in
the system, otherwise the Intel Matrix Storage Manager option
ROM will be disabled.
During POST, press Ctrl-I in the Intel Matrix Storage Manager option
ROM prompt.
Creating the RAID 1 volume
1 In the Onboard SATA RAID Configuration Utility, select
1. Create RAID Volume under the Main Menu
, then press Enter.
2 Specify a name for the new RAID volume, then press Enter.
3 Use the Up and Down arrow keys to select RAID 1 (Mirror), then
press Enter.
4 Use the space bar to select the drives that you want to add to the
array, then press Enter.
This step is only applicable for systems with more than two hard
drives installed.
5 Press Enter to accept the RAID 1 volume capacity.
6 Press Enter, then Y to start creating the new RAID 1 volume.
Once the new RAID 1 volume is created, it’ll be listed under the
Disk/Volume Information
.
7 Revert to the Main Menu
and select 4. Exit the MAIN MENU,
then proceed to the OS installation.