Filter
Top Products
107
Onboard LSI SATA RAID configuration
This section briefly shows how to create a RAID 1 volume using the
onboard LSI SATA RAID function.
Enabling the onboard LSI SATA RAID function
1 Turn on the server and the monitor.
2 During POST, press F2 to access the BIOS Setup Utility.
3 Select the Advanced
| IDE Controller submenu.
4 Change the setting of the Configure SATA as RAID
field to
Enabled.
The SATA RAID OPROM
field will appear.
5 Change the setting of the SATA RAID OPROM
field to LSI.
6Press F10, and select Yes to save the new SATA RAID settings and
close the Setup Utility.
Entering the onboard LSI RAID Configuration Utility
During POST, press Ctrl-E in the Intel Embedded Server RAID
Technology information screen.
Loading the onboard LSI SATA RAID default setting
1 In the onboard LSI RAID Configuration Utility, select Objects from
the Managemen
t menu.
2Select Adapter from the Objects
list.
The available adapter options will be displayed.
3Press Enter in the adapter list.
The adapter settings will be displayed.
4Select Factory Default, then YES to load the default settings.
5 Close the configuration utility.
6Press Ctrl+Alt+Del to reboot the system.