Filter
Top Products
3 Upgrading the system
34
Note: The illustration below shows the Altos G701 server chassis.
Removing the side panel
1 Turn off the system and all the peripherals connected to it.
2 Unplug all cables from the power outlets.
3 Place the system unit on a flat, stable surface.
4 Remove the front bezel.
Refer to the preceding section for detailed instructions.
5 Loosen the three thumbscrews located at the end of the left panel
closest to the front panel (1). Keep them for later use.
AA G701 - EN.book Page 34 Tuesday, February 25, 2003 5:19 PM