Filter
Top Products
3 Upgrading the system
38
b SCSI drive power cable
c SCSI drive fault LED cable
5 Pull out the cage from the chassis.
Installing a hard disk into the hot-swappable cage
hard disk carrier
Note: You need not remove the hot-swappable cage from the
chassis to install a hard disk into the cage’s hard disk carrier.
1 Press your finger to the SCSI drive release lever (1), then pull out
the hard disk carrier from the cage (2).
AA G701 - EN.book Page 38 Tuesday, February 25, 2003 5:19 PM