Filter
Top Products
73
Reset
Configure Data
BIOS setup stores the configuration data of
Plug and Play devices in NVRAM
(Non-volatile Random Access Memory).
When this parameter is set to Yes, current
data is deleted and a new set of
information is created during the next
system bootup.
No
Yes
PCI Latency
Timer
Sets a timing parameter for the PCI bus 64
USB Function Enables the system’s USB ports Enabled
Disabled
Legacy USB
Support
Enable this parameter when you intend to
use a USB device and are using a non-Plug
and Play operating system, such as DOS.
Disabled
Enabled
ARMD
Emulation Type
Selects the ARMD (ATAPI Removable
Media Device) emulation type
Hard Disk
Auto
Floppy
Parameter Description Option
AA G701 - EN.book Page 73 Tuesday, February 25, 2003 5:19 PM