Filter
Top Products
Plug 2 lamp cables to the connectors of inverter
board.
Take lamp cables out from the holes shown as the
photo.
Use a Hex-head and screwdriver
screwed the DVI and D-SUB connectors (No.1~4
Hex Nut screws
Size=M3x8;Torque=6.5 KGFxCM).
6.5
±0.5
±0.5
Phillips-head
Torque= KGFxCM).
Take a key function board to hook with front
bezeland connect to key function cable.
Put a ear over n he ssembled nit nd
ress on force echanisms ocked nd irmly
attached
.
rc ota ua
pmlaf
Assemble the stand upper side to the rear cover
through the way of screwing 4 screws till both
units firmly attached.
(No1~4 Screw Size=M4x10;
Torque=12
KGFxCM).
±
1
Assemble the hinge cover into both two sides
4. Assembly and Disassembly Procedures (continued)
S11
S10
S6
S8
S7
1
2
3
4
1
2
4
3
1
2
3
4
1
2
3
4
S9
S13
S12
Use a Phillips-head screwdriver screw 1 screw
(No1 Screw Size=M4x10;
Torque=7.5~9.5KGFxCM).
1
13
Go to cover page
ACER X193HQ