Filter
Top Products
Use a Phillips-head screwdriver screwed the
No.1~2 screws till that interface board and bracket
chassis base firmly attached.
(No1~2 screw size=M3x6; Torque=9~10KGFxCM).
Use a Phillips-head screwdriver screwed the
No.1~4 screws till that power board and bracket
chassis base firmly attached.(No1~3 screw
size=M3x6; No4 screw size=M4x8;
Torque=9~10KGFxCM).
Connect the cable between power board(P802)
and interface board (P301)
Connect the cable between power board(P003) and
interface board(P308)
Connect the USB board cable(P301) into interface
board(P805)
Connect speak cable into interface board(P001)
Connect the FFC cable into interface board
Connect the power key cable(P601)into interface
board(P309)
Turn the monitor faced down and put it on the
bracket chassis module till both parts firmly
Connect FFC cable to LCD panel. There are
two locks over here when plugging in should be
noticed.
Fix the speaker and speaker cable, The white line
intheleft,theredlineintheright.
Take lamp cables out from the holes shown as the
photo.
S4
S5
S3
S2
S1
4.1 Assembly procedures:
4. Assembly and Disassembly Procedures
Plug in parallel direction
1
2
3
4
Angel < 5 degrees
1
2
S6
P308
P301
P003
P802
P309
P805
FFC
P001
14
Go to cover page
ACER H233H