Filter
Top Products
Step-6Press button
The screen will show “PASS”
Step-5 Select “64K” icon to load firmware image. There are two
HEX files. You only need to select “64K” to choose
“H233H_EMEA.H00.hex” and
“H233H_EMEA.H01.hex” will be loaded
in “64~96” automatically.
Check firmware version
Turn off the power,then press force on “ POWER ” and “ E ”
button at the same time then press on “ MENU ”button to
enter factory mode
Note: Please pay attention ,Don’t change any parameter
which is measured by precise machine before shipping out
Go to cover page
36
6. Firmware Upgrade Process (continued)
ACER H233H