Filter
Top Products
S5 When EDID was written successfully that will show below
message on the screen
1A1H
Hardware Configuration:
1. Connect the PRINTER PLUG of DDC FIXTURE with the
printer port of Desktop PC.
2. Plug USB A PLUG of DDC FIXTURE to USB socket of
Desktop PC
3 Use DVI transfer HDMI cable connect between of the DVI
EXTENDING SOCKET and Monitor
4 Take a video cable then connect the D-SUB PLUG and the
D-sub socket of monitor.
5. Re-confirm all the connectors are connected well.
Entering Factory mole to let “EDID WP” be off
Writing EDID procedure for
S1 Choose the folder “X233H-H233H-1A1H”
Double click “ Acer_1A1H_RLT “
The writing process same as writing VGA and DVI
process.
1A1H
S5 When EDID was written successfully that will show below
message on the screen
PARALLEL CONNECTION
USB CONNECTION
VGA CONNECTION
HDMI TRANSFER DVI CONNECTION
39
Go to cover page
7. Writing EDID Process
ACER H233H